Kayfun Mini V2.1 Rebuildable Atomizer Clone By IVOGO

The IVOGO Kayfun Mini V2.1 is a rebuildable atomizer constructed from stainless steel.  It is a sleek device that is very light and versatile. The IVOGO Kayfun Mini is designed to enhance the flavor of your juice by using a cone design that concentrates the flavor through a funnel directly to your palate. It is the same diameter as an eGo battery, so it can be used on an eGo style battery as well as just about any mod on the market that has a 510 connector. Where you use it is only limited by the coil you choose to build.

The IVOGO Kayfun Mini V2.1 comes packaged as kit that includes one Kayfun Mini RBA clone, four large o-rings, two small o-rings, two replacement screws for positive posts, a refillable syringe-tipped e-juice bottle, a polycarbonate tank window, a stainless steel tank window, a drip tip, an eGo beauty ring, and a metal flat head and Phillips screwdriver key chain.

In addition, the IVOGO Kayfun Mini comes with extensive instructions that explain how to use the device. The instructions are a bit challenging to read as there is a lot of information, so the type is very small. The back of the box also contains a lot of good information which is easier to read. Your best option is watching an instructional video, like I ended up doing.

The IVOGO Kayfun Mini can be used as a tank or in dripper mode. I find that I am partial to dripper mode, but gave the tank mode a go and it performed flawlessly without any leakage or mess. It comes with both a polycarbonate tank extension and a stainless steel tank extension for tank cracking e-liquids. The polycarbonate tank allows you to see how much liquid is in the tank, while the stainless steel version doesn't.

There is an additional stainless steel extension tube, as well as both a long and a short stainless steel evaporation chamber included in the kit. It will hold 3 mil of liquid in short mode and over 5 mil in long mode. This device is not lacking in parts or features, so I suggest you watch the video unless you have experience with a Kayfun.

The base of the IVOGO Kayfun Mini has an airflow hole, a fill hole and a small screw that is used to adjust the airflow. Although you can refill using the fill hole, I find it much easier to fill from the top. It's just faster and easier.

I installed a pre-made 1.5 ohm coil in mine and tried it on an eGo Twist, a Vamo 2 and an MVP Shine.  It performed well on each of these devices. Afterwards, my friend, Mr. Twister, built me a sub-ohm coil and lent me a 30 amp battery so I could give it a go on my King II mechanical mod.  All I can say is, wow!  This variation produces the most vapor and flavor, which is to be expected. I haven't used anything else since!

The IVOGO Kayfun Mini V2.1 is available from AngelCigs for a very affordable price, including fast and free shipping. If you are looking for a well built, versatile rebuildable atomizer, that can be used with just about any battery or mod, this is it.